Monsta® Posted November 21, 2009 Report Posted November 21, 2009 me monitor is suffering from pixel flare! any one have any idea what could be causing this? the main symptoms are random pixels of changing/ flickering colours (not dead or stuck pixels) when this occurs it can be cancelled by turning off the montor a few times any ideas?
Mr Darn Posted November 21, 2009 Report Posted November 21, 2009 Sounds like a graphics card problem, or could be the cable connecting the two.Have you got on-board graphics you could hook up too for a while to eliminate it?
threegee Posted November 22, 2009 Report Posted November 22, 2009 Sounds like a graphics card problem...How would the graphics card know that the monitor has been turned on and off a few times?As usual not enough info to give an accurate diagnosis. VGA or DVI or other connection being the main unknown here. Make and model of monitor + graphics card would help too. And.. we don't even get to know for sure if it's a CRT or LCD. General advice: right click on the desktop and change video res. and colour depth to see what happens.Normally this would sound like duff graphics RAM chips on card, but in this case it is starting to sound more like local RAM or display circuitry on the monitor.
Monsta® Posted November 22, 2009 Author Report Posted November 22, 2009 How would the graphics card know that the monitor has been turned on and off a few times?As usual not enough info to give an accurate diagnosis. VGA or DVI or other connection being the main unknown here. Make and model of monitor + graphics card would help too. And.. we don't even get to know for sure if it's a CRT or LCD. General advice: right click on the desktop and change video res. and colour depth to see what happens.Normally this would sound like duff graphics RAM chips on card, but in this case it is starting to sound more like local RAM or display circuitry on the monitor.the graphics card is an ATI Radeon hd 2600 xt (msi) and the monitor is a hanns-g 19" lcd (hc194d) the problem started not long after installing windows 7!!! tried changing the res, colour depth, refresh rate and it does clear the problem until the pc is restarted then once more the pixels have a fit and the power button is pressed two - three times till corrected.
Andy Millne Posted November 22, 2009 Report Posted November 22, 2009 Is it Windows 7 Final or RC? I'm running an RC build and "my" secondary display has a similar problem. Pretty sure it's the monitor though here.
threegee Posted November 23, 2009 Report Posted November 23, 2009 the graphics card is an ATI Radeon hd 2600 xt (msi) and the monitor is a hanns-g 19" lcd (hc194d) the problem started not long after installing windows 7!!! tried changing the res, colour depth, refresh rate and it does clear the problem until the pc is restarted then once more the pixels have a fit and the power button is pressed two - three times till corrected. You still don't say if you are using a VGA or DVI connection - the important thing remember! Monitor has both connections and so you could just be using a DVI - VGA adaptor (possibly one is supplied with the card?). If you are using a VGA lead then the actual prob is almost certainly nothing to do with the computer or graphics card. If it's using the DVI input then try a better quality DVI lead before condemning the monitor, though here there is an outside chance the card is implicated in the problem. All DVI leads are not created equal. I don't suppose the monitor supports DVI-D but haven't checked. Probably the card does. But DVI-D leads will most often be better quality than plain ones; especially long budget plain ones!If this is 100% DVI then try swapping to a VGA lead at the same res. etc. to see if the problem persists. If it does then, as indicated above, it is fairly safe to condemn the monitor.BTW I wouldn't call this problem flaring; that's something confined to CRTs. It sounds more like a data clocking problem.
Mr Darn Posted November 23, 2009 Report Posted November 23, 2009 How would the graphics card know that the monitor has been turned on and off a few times?Perhaps because it could be sending the monitor faulty data, and turning the monitor off then on clears it?Just trying the cheep options first...*Snatches dummy from air* Phew! Nearly!
Monsta® Posted November 23, 2009 Author Report Posted November 23, 2009 You still don't say if you are using a VGA or DVI connection - the important thing remember! Monitor has both connections and so you could just be using a DVI - VGA adaptor (possibly one is supplied with the card?). If you are using a VGA lead then the actual prob is almost certainly nothing to do with the computer or graphics card. If it's using the DVI input then try a better quality DVI lead before condemning the monitor, though here there is an outside chance the card is implicated in the problem. All DVI leads are not created equal. I don't suppose the monitor supports DVI-D but haven't checked. Probably the card does. But DVI-D leads will most often be better quality than plain ones; especially long budget plain ones!If this is 100% DVI then try swapping to a VGA lead at the same res. etc. to see if the problem persists. If it does then, as indicated above, it is fairly safe to condemn the monitor.BTW I wouldn't call this problem flaring; that's something confined to CRTs. It sounds more like a data clocking problem.sorry its a dvi and its a quality one cost a tenner (i got it half price) made by philips! data clocking sounds like i need to look into this! thanks
Recommended Posts
Create a free account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now